LYC-J coalescing dehydration oil filter

Product introduction

Based on the principle that different liquids have different surface tensions, the LYC-J coalescing dewatering oil filter can clean up particulate impurities, emulsified water and free water in the oil without damaging the quality of the original products. For oil containing a lot of water, the separation effect is obvious.

Filter principle

1. Particle filtration system

The large filter area design can well filter out very fine particles and impurities, so that the oil can reach a high degree of cleanliness.

2. Coalescing system

The coalescing system is composed of a set of coalescing filter elements. After passing through the filter element, the free water and emulsified water in the oil are coalesced into larger water droplets, and then rely on gravity.

Settled into the water storage tank under the action.

3. Separation system

The separation filter element of the separation system is made of hydrophobic material. When the oil passes through the filter element, the water droplets are blocked on the outer surface of the filter element and coalesce with each other until they settle into the water storage tank due to the action of gravity.

4. Drainage system

The separated water is stored in the water storage tank. When the interface height reaches the set value, the valve is opened to discharge the water until it drops to the lower liquid level, and the valve is closed to stop the drainage.

Product parameters

Model: LYC-J series

Flow: 25L/min-400L/min

Rated pressure: 0.6MPa

Water content after filtration: ≤100ppm

Coarse filtration precision: 100μm

Recommended viscosity: 10-120cst

Motor power: 0.75-13KW

Applications

1. Purification of turbine oil and transformer oil;

2. Water removal and impurity filtration of hydraulic lubrication system oil;

3. Access the hydraulic lubrication system to improve the cleanliness of the system.

Product Details