LYC-400J coalescing and separating oil filter

Scope of application

LYC-400J coalescing and separating oil filter adopts oil-water separation filter, without heating, dehydrated oil can meet national standards. Mechanical impurities in oil can be filtered and purified to the national standard; Trolley design, easy to use.

Product characteristics

1) This type of oil filter adopts oil-water separation filter, which does not need heating, and the dehydrated oil can meet the national standard.

2) Because it is not heated, it ensures that the additives in the oil do not crack and deteriorate.

3) Simple operation, can automatically run online and release water, do not need to be guarded.

4) Low operation cost, 50% lower than the cost of vacuum oil filter, centrifugal separation, plate and frame pressure filter.

5) This type of equipment has standard type and explosion-proof type.

Working principle

The unqualified oil first enters the primary filter, the large particles of impurities are intercepted, the oil to remove the large particles of impurities is transported by the oil pump to the fine filter, the smaller impurities are removed in the fine filter, continue to enter the convergence separator, the principle of molecular separation technology is used to perform pressure change analysis of the oil, so that the dissolved water in the oil, free water, quickly break the oil film out of the oil molecules and precipitate; At this point, dehydration is completed to remove impurities, so as to achieve the required moisture and cleanliness requirements.

Product characteristics